Polyester

Chrome Polyester - For screen printing

Front material: 50 micron polyester with specially treated surface
Release paper: Silicone board, PE coated on both sides, 160g/m²
Adhesive: Solvent polyacrylate permanent adhesive
Colours: Gloss chrome
Dimensional stability: No shrinkage in cross direction, in length < 0,1mm
Temperature resistance: -40°C to +120°C
Adhesive power (after 24hrs): 12 N/25 mm
Tensile Strength: Along: Min. 200 MPa and across: Min. 260 MPa
Elongation at break: Along: Min. 125% and across: Min. 80%
Service life: 2 years
Minimum Application temperature: +8°C

Brushed Chrome Polyester - For screen printing

Front material: 50 micron polyester with specially treated surface
Release paper: PE coated on both sides, 160g/m²
Adhesive: Acrylic based permanent ahesive
Colours: Brushed Chrome
Dimensional stability: 0.2 mm max
Temperature resistance: -20°C to +80°C (24hrs) +110°C (1hr)
Adhesive power (after 24hrs): 750 N/m
Service life: 2 years
Minimum Application temperature: +10°C

Polyester Film - For laser printing

Note: This material must have adhesive applied if to be used for stickers
Material: 120 micron print receptive polyester film - toner optimised
Colours: Matt white
Melting Point: 250°C
Shrinkage: MD -0.37%, TD +0.1% after 5 minutes at 150°C Tensile Strength: MD 14KgF/mm2, TD 17KgF/mm2
Elongation at break: MD 120%, TD 120%
Service life: 2 years
Minimum Application temperature: +10°C